
Get the grime off and the joints full again
Paver Cleaning and Joint Sand in St. Petersburg, FL
Call (727) 591-3365 to have a local contractor wash pavers and refill the joints with sand.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get my pavers cleaned in St. Petersburg without a long wait?
A local contractor can clean pavers across St. Petersburg, FL, and you will hear back within 1 business day, usually much sooner. Fresh joint sand is part of the job, and the free estimate comes with no pressure to book. To start, call (727) 591-3365.
Cleaning lifts off the algae, rust and dirt that dull pavers in this humid corner of Pinellas County, so the surface looks brighter and grips better underfoot. New sand then goes between the pavers, which holds them steady and leaves weeds less room. A side path gone green by August can look cared for again. Point out the roughest patches when you request a free estimate.
Paver Sealing St Petersburg Is Proud to Serve Tampa Bay

What is part of a paver cleaning job in St. Petersburg?
The work covers stain treatment, a gentle wash and new joint sand once the surface dries. Book it by itself, or treat it as step one of a sealing job. Shaded paths and the ground near sprinkler heads take the longest. To line up a cleaning, call (727) 591-3365.
Stain treatment
A cleaner matched to the problem goes on first, whether it is algae, oil, rust or the white salt film called efflorescence, and it is tried on a small spot.
Gentle wash
A flat surface cleaner covers the area evenly, with pressure kept low enough to leave the sand in the joints.
Fresh joint sand
Once the pavers are dry, polymeric sand is swept into every gap and misted so it hardens.
Sealer if you want it
A coat can follow after the surface has dried completely. The sealing guide explains what it adds.
What are the signs my pavers need cleaning?
Signs include a green or black film along shaded edges, brown tannin spots under oak trees, orange or white marks near sprinkler heads, weeds in the joints and sand on the drive after a storm. Algae leads that list because a slick walk or pool deck can cause a fall. To have yours looked at, call (727) 591-3365.
Is cleaning enough, or should I seal my pavers too?
Cleaning restores how pavers look today, and a coat of sealer decides how long that look holds. A wash alone costs less today, though algae, stains and fading come back on their own timetable. A coat makes later washes easier, yet it needs redoing every few years. If you want the protective coat too, say so when you request a free estimate.
How often should St. Petersburg pavers be cleaned?
No published schedule fits every yard, so go by what you see. Shaded courtyards, pool decks and strips near sprinklers show growth and stains sooner than an open driveway, and the summer rains bring them on faster. Rusty's Pro Wash and Seal says routine cleaning and sealing costs far less than restoration after neglect. To plan a visit for your own yard, call (727) 591-3365.
Does a harder blast clean pavers better?
No. Unilock warns that high pressure can damage pavers and wash out the joint sand, and it suggests a fanned nozzle held about 12 inches from the surface. Washy Bear, a Hillsborough County company, soft washes pool deck pavers at 500 to 1,000 PSI. Pressure and nozzle choice is a fair question when you request a free estimate.
A flat surface cleaner kept at one height leaves an even finish, and a product chosen for each stain does the heavy lifting. To ask about the method now, call (727) 591-3365.
What are the brown spots from oak trees and sprinklers?
Brown marks under a live oak are usually tannins. Rusty's Pro Wash and Seal says oak tannins soak into pavers that are unsealed or under sealed, and that hard water from irrigation leaves mineral deposits. Both get treated before any sealer, since a coat locks stains in. Point out the marks when you request a free estimate.
Why are white patches showing on my pavers?
A chalky white film is typically efflorescence, a salt that works its way out of the pavers. Unilock says it fades in two to three months and can take up to a year, and that sealing should wait until it is gone. Rusty's Pro Wash and Seal says a saltwater pool speeds it up near the deck. Old sealer that has clouded over can look similar, so point out the patch when you call (727) 591-3365.
Which paved areas at a St. Petersburg home can be cleaned?
Any paved area can be washed, whether it is the driveway, the pool deck, the courtyard or the front walk. Each collects its own kind of dirt, so the cleaner and the method change. To start with yours, request a free estimate.
Driveways
Drives carry the weight of cars, leaked oil and long hours of sun. Cleaning one keeps the color even and the joints full where the wheels run.
Pool decks and lanais
A pool deck sees splash, chemicals and bare feet, which wear a surface in a different way than a drive does. Cleaning a pool deck should leave it with decent grip when wet.
Courtyards and patios
Courtyards and patios between a house and a fence stay damp and shaded. Cleaning one starts with the greenest corners and the spots where water collects.
Walkways and entries
A front walk collects planter drips, mulch and soil from the beds beside it. Cleaning an entry is a small job, yet it is the first thing a guest steps on.
What leaves St. Petersburg pavers dirty?
Sun fading, lost joint sand, green growth, tannin and mineral spots and salt lead the list. A wash deals with several of these, and sealing or repairs handle the rest. To find out which apply to your house, call (727) 591-3365.
1. Fading under the Sunshine City sky
The city averages about 361 days of sunshine a year, according to Wikipedia, and Rusty's Pro Wash and Seal lists UV exposure as a steady cause of paver fading. A wash shows how much color is left, and sealing afterward helps keep it.
2. Joint sand lost in the rainy season
Wikipedia describes a rainy season from June through September and about 52 inches of rain a year. Rusty's Pro Wash and Seal says heavy summer rain saturates pavers and erodes the sand between them, so sand goes back in before any sealer.
3. Green growth in damp, shaded spots
Humid air feeds mold, mildew and algae, and Rusty's Pro Wash and Seal points to pool decks, shade and poorly drained areas. A coat of sealer over that growth can trap it, so it is washed off first.
4. Brown tannin and mineral spots
Rusty's Pro Wash and Seal says live oak tannins soak into pavers that are unsealed or under sealed, and that hard water from irrigation leaves mineral deposits. Those marks get treated before a coat goes down.
5. Salt from the air and from the pool
The city has water on three sides, and Rusty's Pro Wash and Seal lists salt air as a load on coastal pavers. It also says a saltwater pool speeds up efflorescence, the white salt film, and can shorten sealer life on the deck.
What does paver cleaning cost in St. Petersburg?
Companies around Tampa Bay publish one bundled range of $1.25 to $2.50 per square foot to clean, sand and seal, and a wash by itself is one part of it. Tampa Bay companies tend to publish the bundled price and not a wash only rate, so ask for the wash priced on its own and compare it with the bundle. A wash only quote should come in under the full range. For a price on your property, request a free estimate.
Rusty's Pro Wash and Seal lists a 1,000 square foot driveway at $1,250 to $2,500 and a driveway plus pool deck of 2,000 square feet at $2,000 to $4,000. For help weighing the two choices, call (727) 591-3365.
Thinking about protection too? The sealing guide explains it, and see which places contractors cover on the service area list. The home page carries the estimate form.
| Paved area | Typical example | Full clean, sand and seal |
|---|---|---|
| 250 sq ft | Small patio | $500 to $1,000 (a minimum charge may apply) |
| 800 sq ft | Pool deck | $1,000 to $2,000 |
| 1,000 sq ft | Driveway | $1,250 to $2,500 |
| 2,000 sq ft | Driveway plus pool deck | $2,000 to $4,000 |
Figures are the project examples a Tampa Bay paver company lists, built on its $1.25 to $2.50 per square foot range. A wash alone is one part of that bundle, so a wash only quote should land below it. Your own quote depends on the surface.

Why use a contractor who works near St. Petersburg for paver cleaning?
A contractor who works around the city knows what humid air, oak shade and irrigation leave behind. Compare the quote with the published figures on this page and decide at your own speed. To begin, request a free estimate.
A contractor who works in the city
A local company already knows the lot sizes, the bay breezes and the summer downpours here. Your first visit then starts from local know-how instead of guesswork.
A free look and a free price
Looking at your pavers and writing the estimate costs you nothing. If the price does not suit you, say no and that is the end of it.
Tampa Bay prices to measure against
Paver companies around Tampa Bay publish what they charge per square foot, and this site passes those figures along. A bid that lands far from them is worth questioning.
Your pace, your decision
Get the figure on paper and give yourself time to think. The contractor standards page covers what to ask before you accept a bid.
Want a free estimate to clean your St. Petersburg pavers?
Use the short form or call, and a contractor answers within 1 business day, often earlier.
Free, no obligation

What do cleaned pavers look like around St. Petersburg?








How does the paver cleaning process go, step by step?
If you skip the sealer, the work stops after step four, once the joints are filled. To set a date, call (727) 591-3365.
1. Measure and inspect
Before pricing the cleaning job, the contractor measures the area and notes cracked or sunken pavers, old sealer, stains and any spot where water stands.
2. Protect and wash
Plants are wetted down and screen panels covered. A flat surface cleaner then washes the pavers evenly, which is gentler on the joints than a bare wand.
3. Treat what is left
Algae gets a biocide, oil gets a degreaser and rust gets its own treatment. White salt film is handled with a cleaner made for it, and each is tried on a small spot first.
4. Refill the joints
Once the pavers dry, polymeric sand is swept in and misted, as ICPI standards describe, so it hardens. Extra sand is brushed off the surface.
5. Seal and walk it with you
If sealer is on the work order, it goes on a dry surface with a sprayer and a roller. The contractor then shows you the finished area and says when feet and tires can return.
Frequently Asked Questions
How do I clean my outdoor pavers?
A contractor works in a set order. Algae and organic stains get a treatment first, then a gentle wash with a flat surface cleaner, then fresh joint sand once the pavers dry. Unilock warns that high pressure washes sand out of the joints, so a fanned nozzle held about 12 inches away is the usual choice.
Can I use Dawn dish soap to clean my pavers?
Unilock describes a mild detergent mix for light dirt and points to dedicated paver cleaners for oil and grease. Because each stain needs its own treatment, a contractor picks the cleaner by what is on the surface, such as algae, rust or oil.
What should I clean pavers with before sealing?
Rusty's Pro Wash and Seal lists pressure washing, mold and algae removal, oil stain removal and rust treatment, used as the surface needs them. Unilock adds that pavers should then dry at least 24 hours before sealer goes on.
How do I clean the pavers around my pool?
Gently. Washy Bear, a Hillsborough County company, puts a soft wash for pool deck pavers at 500 to 1,000 PSI, against 3,000 to 4,000 for a driveway. Rusty's Pro Wash and Seal says a saltwater pool speeds up efflorescence on the deck, so ask how the contractor treats that white film.
Is the water in St. Petersburg, Florida hard?
Sources differ. A water hardness lookup site lists the city system as moderately hard, while one St. Petersburg ZIP code reads harder. Rusty's Pro Wash and Seal says hard water from irrigation leaves mineral deposits that build up faster on unsealed pavers, so sprinkler marks are a common reason for a wash.
What does it cost to clean and seal pavers in St. Petersburg?
The published Tampa Bay rate for washing, joint sand and sealer together is $1.25 to $2.50 per square foot. A 600 square foot St. Petersburg driveway lands near $750 to $1,500. A wash with no sealer is one piece of that bundle, so ask for it priced on its own.
Why do my pavers keep turning green in St. Petersburg?
Damp air, shade and standing water feed algae, and the city has a rainy season from June through September with about 52 inches of rain a year. Rusty's Pro Wash and Seal points to pool decks, shaded patios and poorly drained spots. A coat of sealer can make them easier to rinse.
Can pressure washing damage pavers?
Yes, if the pressure is too high. Unilock says high pressure can damage pavers and wash out the joint sand, and it suggests a fanned nozzle at about a 30 degree angle, roughly 12 inches from the surface. Sand that does wash out is replaced before any sealer goes on.
How long do pavers need to dry before sealing?
Unilock says a few hours in warm sun can be enough after a wash, and about 24 hours in cool or shaded spots. Rain stretches that, which is why a wash and a seal are often done on separate days.
Are the white stains on my pavers efflorescence?
Often, yes. Efflorescence is a white salt film that works out of the pavers, and Unilock says it typically fades in two to three months and can take up to a year. Old sealer that has clouded over can look the same, so a contractor checks before treating it.
Do pavers around a saltwater pool need extra care?
They can. Rusty's Pro Wash and Seal says a saltwater pool speeds up efflorescence and can shorten sealer life on the deck. Ask the contractor how the wash, the cleaner and the sealer suit a salt pool and the screen cage around it.
What happens if I wait too long to clean my pavers?
The bill grows. Rusty's Pro Wash and Seal puts routine cleaning and sealing at $1,000 to $3,000 and major restoration at $3,000 to $8,000 or more, and it warns that sealing over algae or stains can trap them under the coat.
Ready for clean, even pavers again?
Reach out by phone or the short form, and a contractor responds within 1 business day, usually much sooner.
Free, no obligation
