Click To Call(727) 591-3365Click To Get A Free Estimate
Pale travertine pavers around a screened pool with a lounge chair and a palm tree beside the deck

Protect travertine pool decks and lanais

Travertine Sealing in St. Petersburg, FL

Call (727) 591-3365 for a free quote on sealing the travertine around your pool, lanai or front entry.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(727) 591-3365
Travertine

Can someone seal my travertine in St. Petersburg, and how soon do I hear back?

Yes. Travertine sealing is offered throughout St. Petersburg, FL, and an answer reaches you inside one business day, often within a few hours. The estimate costs nothing and the decision stays with you. To start the conversation, call (727) 591-3365.

Travertine gives a patio or pool deck a soft, creamy look, and it is a natural stone, so it soaks up spills in a way that poured concrete does not. A sealer slows that down and makes sunscreen, leaf drips and pool splash easier to rinse away. Tell the contractor where the stone sits and how the family uses it when you request a free estimate.

Call (727) 591-3365

Cream colored travertine deck beside a rectangular pool, sunlight on the stone and a pot of palms in the corner
Service area

Which St. Petersburg neighborhoods and nearby towns can book travertine sealing?

Contractors work from the downtown bayfront out to the Gulf side of the peninsula and across the water to Hillsborough and Manatee counties. Each place below has its own page. Cannot spot your street? Call (727) 591-3365 and ask.

Does travertine around a St. Petersburg pool need sealing at all?

Sealing is a choice, and Travertine Mart says so directly. It also says a suitable sealer reduces how much liquid the stone absorbs, though it does not make the stone stain proof, acid proof or free of upkeep. For a deck that gets daily splash, sunscreen and bare feet, many owners decide that slower absorption is worth it. To talk through whether yours qualifies, call (727) 591-3365.

Style plays a part too. Snell Isle was platted in 1925 with Mediterranean Revival roots, and Old Northeast and the downtown bayfront share that look with stucco walls and tile roofs. Pale stone belongs with that style, and it shows every brown blotch under a pool cage. If an association or historic district covers your block, check its rules on exterior changes, then request a free estimate.

Should travertine get a penetrating sealer or a surface coating?

For most pool decks, a penetrating sealer. Outercle recommends one labeled safe for natural stone and rated for pool areas, and says film forming sealers can make the surface more slippery. Travertine Mart adds that a coating changes the walking surface and that a product should be tested on a sample of the stone first. To hear which product a contractor would pick for your deck, call (727) 591-3365.

Penetrating sealer

Soaks into the pores and leaves the stone looking natural. A Tierra Verde paver company says travertine can be walkable the same day with this type.

Surface coating

Sits on top and can add sheen. The same company says travertine needs about 24 hours before foot traffic with a topical sealer.

Sample test

A small hidden patch shows how the stone will darken or shine before the whole deck is done.

Salt resistant formula

Outercle suggests a sealer designed to resist salt related wear when a saltwater pool sits beside the stone.

Why choose us

Why can't travertine be cleaned like concrete pavers?

Travertine is acid sensitive. Unilock names marble, limestone and travertine as acid sensitive stones and points to a high alkaline cleaner and degreaser for them. Outercle says to use a pH neutral stone cleaner and to avoid acidic cleaners, bleach products and aggressive pressure washing, since all three can mark the stone or the sealer. A contractor who works on natural stone picks the product before any water is sprayed. To ask which cleaner would be used on yours, request a free estimate.

Travertine Mart adds that acid can etch carbonate stone even after sealing, and that includes household vinegar. A dull ring left by a spilled drink is usually an etch, not a stain, and it takes a different fix than cleaning does. Mention any rings or spots you have already noticed when you call (727) 591-3365.

How can I tell my travertine needs attention?

Tropical Paver Sealing lists four signs: discoloration or lost shine, cracks or chips, a rough or uneven surface, and moss or mildew. Outercle suggests an annual inspection and a water bead check between visits, where water that soaks in fast shows the sealer has worn thin. In the damp shade of a screen cage or a courtyard wall, green film is often the first thing you spot. To put a contractor's eyes on your stone, call (727) 591-3365.

How often should travertine be resealed in St. Petersburg?

Outercle gives three ranges: one to two years for a deck with heavy pool use, two or three years with higher grade products, and three to five years in lighter use. Heavy use here is easy to picture, since a home near the bay may use the pool most of the year. Rusty's Pro Wash and Seal adds that a saltwater pool can shorten sealer life on the deck. For a schedule that fits your stone, request a free estimate.

What stains travertine around a pool in St. Petersburg?

Outercle lists chlorine related staining, algae in damp areas, sunscreen and body oils that work into the stone, and food spills. Rusty's Pro Wash and Seal adds oak tannin and the mineral film left by hard water from sprinklers. The University of Florida's IFAS Extension says most Florida well water is high in iron, and that irrigating with it leaves orange rust stains on whatever the spray touches. Unilock notes that rust on natural stone needs a commercial product, which means a contractor tests a small spot first. To get stains on your stone identified, call (727) 591-3365.

Homeowner pointing out a faint ring on pale travertine while a contractor kneels to look at the stone
Pricing

What does travertine sealing cost in St. Petersburg?

The nearest published number is the $1.25 to $2.50 per square foot that Tampa Bay paver companies list for cleaning, sanding and sealing. Rusty's Pro Wash and Seal says condition moves the price more than material, and that natural stone costs slightly more. A Hillsborough County company, Washy Bear, lists $1.50 to $2.50. For a quote written around your own deck, request a free estimate.

Small jobs carry a minimum. Rusty's gives minimum charges of $500 to $1,000, and notes that a 250 square foot patio priced at $750 works out to $3.00 per square foot. A pool coping strip may land there, while a large lanai spreads the setup over more feet. Ask whether travertine cleaning, repairs and sealer are priced as one line or three when you call (727) 591-3365.

Travertine areaTypical exampleClean, sand and seal at the published range
150 sq ftPool coping and a landing$188 to $375, though a minimum charge of $500 to $1,000 may apply
400 sq ftLanai or courtyard$500 to $1,000
800 sq ftScreened pool deck$1,000 to $2,000
1,200 sq ftPool deck plus entry walk$1,500 to $3,000

No page this site read prints a price for travertine alone, so this table uses the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish for cleaning, sanding and sealing. Rusty's Pro Wash and Seal says natural stone costs slightly more than concrete pavers, so expect a travertine quote to sit toward the upper half.

Get a Free Estimate

What happens during a travertine sealing visit?

Tropical Paver Sealing describes three steps: clean, repair where possible, then seal. A longer five step routine from a Tierra Verde paver company adds an evaluation first and a cleaning with a fungicide for mildew. Stone gets more care than concrete, so the whole process moves slower. To set up a visit, call (727) 591-3365.

1. Look and test

The contractor checks the stone for cracks, chips, etching and old coating, and tries the product on a small hidden patch.

2. Clean with a stone safe product

Algae and stains are treated with a cleaner made for natural stone, then the surface is rinsed with the pressure kept low.

3. Repair and dry

Chips and loose pieces are dealt with where possible, and the stone dries fully before any sealer touches it.

4. Seal and cure

The sealer goes on in thin, even passes, and the contractor says how long to stay off before feet and furniture return.

Will sealed travertine be slippery when wet?

It depends on the product. Travertine Mart warns not to assume extra sheen suits a pool deck, and Unilock says a glossy finish can be slippery when wet while a penetrating matte finish keeps better traction. Outercle pairs a penetrating sealer with a textured finish for the same reason. Bare feet around a pool are the reason to ask about grip before you pick a look. To raise it with a contractor, request a free estimate.

Can sealing fix cracks or low spots in my travertine?

No. Travertine Mart says a sealer does not repair cracks, drainage problems or poor installation. Stone that rocks, tilts toward the house or collects a puddle after a summer storm needs the base or the joints fixed first. St. Petersburg gets about 52 inches of rain a year, so standing water is a clue worth mentioning. Describe any low spots when you call (727) 591-3365.

Photos

What does sealed travertine look like at St. Petersburg area homes?

Freshly sealed paver driveway beside a travertine lanai near St. Petersburg
Sealed paver pool deck beside a travertine lanai near St. Petersburg
Sealed paver patio behind the home beside a travertine lanai near St. Petersburg
Sealed paver walkway to a front door beside a travertine lanai near St. Petersburg
Close view of freshly sealed pavers beside a travertine lanai near St. Petersburg
Paver area with one cleaned half beside a dirty half beside a travertine lanai near St. Petersburg
Contractor cleaning pavers beside a travertine lanai near St. Petersburg
Contractor sealing or sanding pavers beside a travertine lanai near St. Petersburg
Questions

What do St. Petersburg homeowners ask about travertine sealing?

How often should I seal pavers in Florida?

Most sources land between three and five years for concrete pavers, and travertine can ask for more attention. Outercle says a pool deck with heavy use may need a new coat every one to two years, a higher grade product can stretch to two or three, and lighter use can reach three to five.

What do professionals use to seal pavers?

For travertine the usual pick is a penetrating sealer. Outercle says to look for one labeled safe for natural stone and rated for pool areas, because film forming coatings can add slipperiness. Concrete pavers more often get a water based or solvent based coat put on with a sprayer and a roller.

What is the average cost to seal pavers in Florida?

Tampa Bay companies publish $1.25 to $2.50 per square foot to clean, sand and seal, and a Hillsborough County company lists $1.50 to $2.50. Small jobs often meet a minimum charge of $500 to $1,000. Natural stone usually lands toward the upper end.

How much does it cost to seal travertine pavers?

No page this site read prints a rate for travertine alone. Using the published $1.25 to $2.50 per square foot, a 400 square foot lanai comes to about $500 to $1,000, and an 800 square foot pool deck to about $1,000 to $2,000. Rusty's Pro Wash and Seal says natural stone costs slightly more.

Does sealing stop acid from etching travertine?

No. Travertine Mart says acid can still etch carbonate stone after it is sealed, and that even vinegar can mark it. Sealing slows liquid from soaking in, and it does not make the stone acid proof or stain proof.

Is sealed travertine slippery around a St. Petersburg pool?

It can be if the wrong product goes on. Outercle says topical, film forming sealers can add slipperiness, and Travertine Mart warns not to assume extra sheen suits a pool deck. A penetrating sealer with a matte look keeps more grip.

Can travertine be sealed if it is already stained or green?

Not until it is clean. Rusty's Pro Wash and Seal says sealing over stains or algae can trap them. A contractor treats the growth first with a cleaner safe for natural stone, lets the stone dry, and only then applies sealer.

How long before I can walk on sealed travertine?

A Tierra Verde paver company says travertine is walkable in 24 hours with a topical sealer and the same day with an impregnating sealer. Ask the contractor for the cure time of the exact product on your stone.

Does rain stop a travertine sealing job?

It can delay one. Unilock asks for clear skies for 24 to 48 hours before and after sealing, and St. Petersburg has a rainy season from June through September. A contractor watches the forecast and moves the date when a storm is near.

Does sealing change how travertine looks?

It can. Unilock says a wet look deepens color, while a penetrating matte finish keeps the natural look and the grip. Travertine Mart adds that a coating can change the walking surface, so a small sample test comes first.

Is salt air from the bay hard on travertine?

It adds wear. Rusty's Pro Wash and Seal lists salt air as a load on coastal pavers, and Outercle says salt can be especially challenging for natural stone over time. Homes close to the water are the ones to watch.

Does a saltwater pool change how travertine is sealed?

It raises the stakes. Outercle says salt can be especially hard on natural stone over time and suggests a sealer designed to resist salt related wear. Rusty's Pro Wash and Seal adds that saltwater pools speed up efflorescence and can shorten sealer life.

Want a price on sealing your travertine?

Send a short request or call, and a local contractor replies inside one business day, often within hours.

Call (727) 591-3365

Free, no obligation